Hot feed extruders are mainly used for shaping extrusion of various products in rubber production. Equipped with different heads, it can be used for rubber hose, wire and cable extrusion, extrusion of various tire treads, and shaped extrusion of various special-shaped films and rubber sheets.
Model | XJ-65 | XJ-85 | XJ-115 | XJ-150 | XJ-200 | XJ-250 |
Screw diameter(mm) | 65 | 85 | 115 | 150 | 200 | 250 |
L/D ratio | 4.5:1 | 4.8:1 | 4.8:1 | 4.6:1 | 6:1 | 6:1 |
Max rotation speed of screw (r/min) | 75 | 65 | 60 | 55 | 45 | 45 |
Main motor (kw) | 11 | 18.5 | 30 | 55 | 75 | 110 |
Steam pressure(Mpa) | 0.4-0.6 | 0.4-0.6 | 0.4-0.6 | 0.4-0.6 | 0.4-0.6 | 0.4-0.6 |
Cooling water pressure (Mpa) | 0.2-0.4 | 0.2-0.4 | 0.2-0.4 | 0.2-0.4 | 0.2-0.4 | 0.2-0.4 |
Max capacity (kg) | 85 | 190 | 420 | 1080 | 2400 | 3600 |
Hot feed extruders are mainly used for shaping extrusion of various products in rubber production. Equipped with different heads, it can be used for rubber hose, wire and cable extrusion, extrusion of various tire treads, and shaped extrusion of various special-shaped films and rubber sheets.
Model | XJ-65 | XJ-85 | XJ-115 | XJ-150 | XJ-200 | XJ-250 |
Screw diameter(mm) | 65 | 85 | 115 | 150 | 200 | 250 |
L/D ratio | 4.5:1 | 4.8:1 | 4.8:1 | 4.6:1 | 6:1 | 6:1 |
Max rotation speed of screw (r/min) | 75 | 65 | 60 | 55 | 45 | 45 |
Main motor (kw) | 11 | 18.5 | 30 | 55 | 75 | 110 |
Steam pressure(Mpa) | 0.4-0.6 | 0.4-0.6 | 0.4-0.6 | 0.4-0.6 | 0.4-0.6 | 0.4-0.6 |
Cooling water pressure (Mpa) | 0.2-0.4 | 0.2-0.4 | 0.2-0.4 | 0.2-0.4 | 0.2-0.4 | 0.2-0.4 |
Max capacity (kg) | 85 | 190 | 420 | 1080 | 2400 | 3600 |
