The cold feed extruder can be used for tire tread and sidewall shaping extrusion, rubber hose, wire, cable extrusion coating, rubber shoe rubber and other rubber products extrusion, calender heat refining, glue supply, etc.
Model | XLJ-65 | XLJ-75 | XLJ-85 | XLJ-90 | XLJ-120 | XLJ-150 |
Screw diameter (mm) | 65 | 75 | 85 | 90 | 120 | 150 |
L/D Ratio | 12:1 | 14:1 | 14:1 | 14:1 | 14:1 | 14:1 |
Max rotation speed of rotor（r/min） | 75 | 62 | 60 | 60 | 55 | 45 |
Main motor (kw) | 18.5 | 37 | 37 | 55 | 90 | 125 |
Steam pressure（Mpa） | 0.4-0.6 | 0.4-0.6 | 0.4-0.6 | 0.4-0.6 | 0.4-0.6 | 0.4-0.6 |
Cooling water pressure （Mpa） | 0.2-0.3 | 0.2-0.3 | 0.2-0.3 | 0.2-0.3 | 0.2-0.3 | 0.2-0.3 |
Max capacity | 100 | 160 | 220 | 260 | 520 | 830 |
The cold feed extruder can be used for tire tread and sidewall shaping extrusion, rubber hose, wire, cable extrusion coating, rubber shoe rubber and other rubber products extrusion, calender heat refining, glue supply, etc.
Model | XLJ-65 | XLJ-75 | XLJ-85 | XLJ-90 | XLJ-120 | XLJ-150 |
Screw diameter (mm) | 65 | 75 | 85 | 90 | 120 | 150 |
L/D Ratio | 12:1 | 14:1 | 14:1 | 14:1 | 14:1 | 14:1 |
Max rotation speed of rotor（r/min） | 75 | 62 | 60 | 60 | 55 | 45 |
Main motor (kw) | 18.5 | 37 | 37 | 55 | 90 | 125 |
Steam pressure（Mpa） | 0.4-0.6 | 0.4-0.6 | 0.4-0.6 | 0.4-0.6 | 0.4-0.6 | 0.4-0.6 |
Cooling water pressure （Mpa） | 0.2-0.3 | 0.2-0.3 | 0.2-0.3 | 0.2-0.3 | 0.2-0.3 | 0.2-0.3 |
Max capacity | 100 | 160 | 220 | 260 | 520 | 830 |
